Note: Do not confuse operator identification codes ("opcodes") with either the "Configurable Opcode Settings" or "Configurable Opcode Data" data group. Operator identification codes are special codes used by Emerson ROCPlus messages to define the action they perform and/or the structure of the message of which they are part.
Native CygNet data groups for Emerson ROCPlus EIEs are predefined to use appropriate messages, opcodes, and TLPs to interact with a field device. Most of the time, the exact combination of these items is irrelevant to the proper use of a data group because of the predefined nature of the messages.
However, it is possible to create your own unique data group, using whatever allowed opcode and TLP combination you require, by adding and configuring a "Generic TLP Data" data group. In effect, you can use a "Generic TLP Data" data group to access and organize any TLP data from any supported Emerson ROCPlus field device. For more information, see Generic TLP Data Group.
For more specific information about opcodes and point types, see the appropriate manufacturer-provided documentation.
The following table lists opcode descriptions paired with their corresponding opcode numbers for all CygNet-supported Emerson ROCPlus models.
Note: This list is not complete. Because of the numerous combinations of data groups, opcodes, and TLPs possible, and the fact that most Emerson ROCPlus EIE data groups are hard-coded already, this list is only an overview of common opcodes supported by CygNet.
| Opcode Description | Opcode Numbers |
|---|---|
|
Acknowledge RBX |
225 |
|
Alarm Logs |
118 |
|
Archive Data for Day/Month |
138 |
|
Configurable Opcode Data/Settings |
10/11 |
|
Error Message |
255 |
|
Events Log |
119 |
|
History Multiple Points |
136 |
|
History Point Configuration |
125 |
|
Hourly History Values |
135 |
|
Liquid Applications |
200 - 220 |
|
Login Request |
17 |
|
Point Parameters (contiguous) |
166/167 |
|
Point Parameters (non-contiguous) |
180/181 |
|
ROC Configuration |
6 |
|
Sixty-Minute History |
135 |
|
Time/Date |
7/8 |
The following table lists the point type descriptions and point type numbers used in predefined native data groups for supported Emerson ROCPlus models. Any other valid point type can be accessed by means of a "Generic TLP Data" data group.
Note: You cannot configure a user-defined point (UDP) with the Emerson ROCPlus EIE. If you want to configure a UDP, directly access the affected field device and make configuration changes there. After that, use the Emerson ROCPlus EIE to define the UDP for use in CygNet so you can read its data or write data to it.
| Point Type Description | Point Type Numbers |
|---|---|
|
Analog Input |
103 |
|
Analog Output |
104 |
|
Configurable Opcode Data |
99 |
|
Discrete Input |
101 |
|
Discrete Output |
102 |
|
DS800 Configuration |
122 |
|
FST Parameters |
96 |
|
FST Register Tags |
97 |
|
HART |
85 |
|
History Segment Configuration |
124 |
|
History Segment 0-10 Point Configuration |
125 - 135 |
|
History Segment 11-12 Point Configuration |
142 - 143 |
|
I/O Point Config |
24 |
|
Logon Parameters |
92 |
|
Multi-Variable Sensor |
108 |
|
Orifice Meter Run Configuration |
113 |
|
Orifice Meter Run Values |
114 |
|
PID Control |
110 |
|
Pulse Input |
105 |
|
Soft Point |
98 |
|
Station Parameters |
112 |
|
System Analog Input |
109 |
|
System Variables |
91 |
|
Linear Meter Run Configuration |
115 |
|
Linear Meter Values |
116 |
|
Tx History Configuration |
144 |
|
Tx History Point Cfg |
145 |
|
|
|
